Electroforming Kit



Electroforming Kit

This comprehensive Electroforming Kit is designed to be used for electroplating a wide range of non-metal items to the highest standard with a de-luxe high shine plate.

With an almost limitless range of items that can be converted from non-metal surfaces to metal ones available to the user it will afford them the ability to create the most amazing products not available in any high street in the world.

With Larger tanks and more chemicals this is the package for the more serious entrepreneur 

Unlike most other suppliers of electroforming kits ours is the only one that plates non-metal items to a perfect shine with no need to buff or polish whatsoever before applying your final plate and can be used on:

  • Metal
  • Plastic
  • Wood Glass
  • Organic
  • and much more materials too numerous to mention

To see the amazing list of contents of this amazing Electroforming kit please read below

  • GS200 electroforming machine (most plating machines cannot be used for successful electroforming- this one gives smooth, easy, consistent results every time)
  • Full Instruction Manual
  • 1 Litre electroforming copper solution- plates to a mirror with no buffing needed!
  • Heating plate to maintain perfect electroforming temperature (for use with glass upright tank)
  • 6 Copper rod anodes to surround item evenly in tank
  • 2 flat copper anodes (for use in rectangular plastic tanks)
  • Anode bags (to keep solution clean)
  • 1 Litre glass electroforming tank (upright, for use with rod anodes)
  • 4x 1 Litre rectangular plastic tank (for use with flat anodes)
  • Air agitation pump and hose (ensures smooth, even plate)
  • In-tank thermometer (to monitor temperature)
  • Special stand to hold item in place suspended in tank (fully height adjustable arm stand)
  • Stiff copper jigging wire
  • Crocodile clips for holding jigging wire in place on arm
  • 150 ml Spray can of silver conductive paint (VERY easy to use- no need for spray gun!)
  • 1 Litre electrocleaning solution (for removing polishing compounds from polished item)
  • 1 Litre Nickel plating solution (copper needs to be plated with nickel before plating with gold, silver or other finishes, otherwise the top plate will migrate down into the copper over time – this nickel can be brush plated over your electroformed item using the machine and probes supplied. If the item you have electroformed is intended for use as jewellery, then you will need to purchase our Palladium plating solution for this purpose instead)
  • PLUS
  • 100ml copper strike solution (needed for plating over certain metals such as zinc, certain pot metals etc)
  • 100ml chrome plating solution (real chrome- not substitute)
  • 100ml 24k hardened gold plating solution 1 Litre nickel activator (allows you to plate over the nickel with a finish of your choice)
  • 1 Litre stainless steel activator (for plating over all types of steels)
  • 1 Litre chrome stripper solution (for removing chrome which is vital when plating already chrome plated items)
  • 1 Litre anodise stripper (necessary for anodised aluminium items such as iPhones etc)
  • 1 Litre AllyCu solution (necessary for plating over aluminium)
  • Eye protectors
  • Box of latex gloves
  • Copper brightener (to maintain brightness levels of solution)
  • GS Compound polish (100ml) for use by hand if no access to a buffing machine
  • 3 GS Stainless steel probes (for use brush plating
  • Large bundle of swabbing (for use if brush plating with the steel probes)
  • Wire wool (for deoxidising the copper rods and jigging wire – takes just seconds)
  • Bag of practice pieces for brush plating tutorial (tutorial is featured in the main plating manual which is emailed to you upon dispatch)


There are no reviews yet.

Be the first to review “Electroforming Kit”

Your email address will not be published. Required fields are marked *